English
Spanish
French
ArabicElectric Pole Accessories
- Home
- Products
- ADSS Suspension Clamp
- CW-PSG: Preformed Dead-end Suspension Grip
Preformed dead-end suspension grip are designed to connect ADSS cable to pole/tower in the straight line. They feature in handiness, ease, with certain load capacity to resist moving.
Aluminum alloy or galvanized steel preformed suspension grip with Insulation Coating(SNAL) is for fixing terminals of the ground wire of overhead lines, can ensure your service life.
Itโs the substitutes of the traditional dead end clamps such as bolted type, compression type and wedge type.
Preformed dead-end suspension grip are designed to connect ADSS cable to pole/tower in the straight line. They feature in handiness, ease, with certain load capacity to resist moving.
Aluminum alloy or galvanized steel preformed suspension grip with Insulation Coating(SNAL) is for fixing terminals of the ground wire of overhead lines, can ensure your service life.
Itโs the substitutes of the traditional dead end clamps such as bolted type, compression type and wedge type.
Description
Preformed dead-end suspension grips were developed to secure and suspension ADSS cable or cables to poles and towers during the construction of telecommunication line.
Hbcrownwealth Preformed dead-end suspension grips are made of galvanized steel wire material.
Additionally equipped with round thimble, that provide superior holding without destruction of wire after years of usage.
Also without round thimble is available which depend on the request working load of cable.
These ADSS suspension grips do not require any tools to install and can be installed directly on the fiber optic cable.
ADSS suspension grips for overhead lines do not require protection rods or side joints and can be installed directly on the fiber optic cable sheath.
However, when the tensile strength is high, spiral ADSS grips with joint protectors should be used to prevent damage to the fiber optic core during use.
In contrast, when the tension is less than 9KN, preformed dead-end suspension grips without protectors can be used, with or without sleeves.
Hbcrownwealth As a reliable preformed guy grips manufacturer, is able to customize the most suitable pre-twisted wire suspension grips according to your cable specifications and distance between poles.
Please contact us now!
Preformed Suspension Grip Features
High strength, good mechanical properties
Can guarantee the quality of installation
The wire guarantee a grip force
Can withstand high unbalanced load
Prevents wires from slipping and reduces wear and tear
Manual installation without any special tools
Parameters
| Parts No. | Description | Material | Cable Size | Code |
| CW-PSG | Preformed Dead-end Suspension Grips for ADSS Cable | Aluminum, Galvanized Steel | 10 – 18 mm | Yellow,Red,Blue,Green,Orange,Black |
Description
Preformed dead-end suspension grips were developed to secure and suspension ADSS cable or cables to poles and towers during the construction of telecommunication line.
Hbcrownwealth Preformed dead-end suspension grips are made of galvanized steel wire material.
Additionally equipped with round thimble, that provide superior holding without destruction of wire after years of usage.
Also without round thimble is available which depend on the request working load of cable.
These ADSS suspension grips do not require any tools to install and can be installed directly on the fiber optic cable.
ADSS suspension grips for overhead lines do not require protection rods or side joints and can be installed directly on the fiber optic cable sheath.
However, when the tensile strength is high, spiral ADSS grips with joint protectors should be used to prevent damage to the fiber optic core during use.
In contrast, when the tension is less than 9KN, preformed dead-end suspension grips without protectors can be used, with or without sleeves.
Hbcrownwealth As a reliable preformed guy grips manufacturer, is able to customize the most suitable pre-twisted wire suspension grips according to your cable specifications and distance between poles.
Please contact us now!
Preformed Suspension Grip Features
High strength, good mechanical properties
Can guarantee the quality of installation
The wire guarantee a grip force
Can withstand high unbalanced load
Prevents wires from slipping and reduces wear and tear
Manual installation without any special tools
Parameters
| Parts No. | Description | Material | Cable Size | Code |
| CW-PSG | Preformed Dead-end Suspension Grips for ADSS Cable | Aluminum, Galvanized Steel | 10 – 18 mm | Yellow,Red,Blue,Green,Orange,Black |
No.95 Qilian St. Shijiazhuang,China
info@hbcrownwealth.com
Phone: +86-311-89871588
